Setting & Adjusting Sensor Thresholds


STEP 1: Click on the Gateway in which you wish to edit the sensors
STEP 2: Click on the Sensor you wish to edit the thresholds
STEP 3: Click on the tab that says manage threshold
STEP 4: Toggle the switch to enable the threshold settings
STEP 5: Click the plus to raise the threshold
STEP 6: Click the minus to lower the threshold
STEP 7: Save the new settings
STEP 8: See that the safety zone has adjusted to the current changes
STEP 9: Click the back arrow (on the top left hand side) and exit as your thresholds have been set